STELRAY PLASTIC PRODUCTS SAMPLE PROJECTS
Stelray Plastic Products, Inc. provides quality plastic injection molded products to customers worldwide. As a full service plastic injection molding company, we offer in house mold tooling, design and engineering support and custom manufacturing for a variety of plastic injection molded products. Here are just a few plastic injection molding projects that we have provided our customers.
Blood Storage System Injection Molding Sample Project
A medical industry client required a stacked blood storage system that goes into a freezer where the blood-filled vials can be selected by a pick-and-place machine. Stelray managed the project, which included the mold and component manufacturing, sourcing, assembly and shipping. We also took on the tooling design and built the plastic injection mold as well as the assembly fixture. Stelray injection molded the plastic side pieces in addition to sourcing the die-cast pieces and hardware for the assemblies. The part is 5.5″ high, 5.375″ long and 3.875″ wide. We used a top-fill polypropylene for the plastic parts and zinc for the die-cast parts and packaged everything in Gaylord boxes. Our turnaround time was 5 to 6 weeks and our full dimensional in-process quality testing and inspection ensured that we met the customer-supplied and FDA specifications. For more information on this project please see below or get in touch with us to find out how we can provide your perfect solution.
Plastic Injection Molded Component for Window Shade Assembly Sample Project
Stelray Plastic Products, Inc. produced this end housing that is used on a pin, in a power window
shade assembly for a home interior industry client. We provided the plastic injection molding of the
polycarbonate end housing and inserted the bronze bushing into the housing while the material
was still expanded from the heat. We knew that the interior diameter of the bushing was a critical
dimension for quality control because it was the key to a proper fit. The part measured 4.5″ long with an outside diameter
of 2.000″. It took us eight weeks to do the tooling and 2 to 3 weeks to produce each 1,000 unit
run for delivery to Connecticut and California.To learn more about this plastic injection sample project,
contact Stelray Plastic Products to discuss your particular requirements.
ABS Power Tool Component Plastic Injection Sample Project
Stelray Plastic Products, Inc. helped design and manufacture the injection mold for a power tool hook and selected the best materials for the job’s requirements. We injection molded the 4.500″ long and 2.375″ wide part in ABS and co-polyester. We also sourced and procured the hardware and aluminum hook, riveted the clip to the housing and hot-stamped the part with yellow type. Before packaging the part for delivery to Texas, we ensured it met the customer-supplied specifications with a full in-process dimensional inspection.
It took us 6 to 8 weeks to develop, design and build the tooling, then an additional 3 to 4 weeks to do the high-volume production runs. Stelray Plastic Products is a one-stop shop that can handle everything from project management to design, procurement, prototyping, material specification, molding and more.